Directions for Use - Trigger Sprays:
Fill the 500 ml trigger bottle with water.
Turn yellow head to trigger bottle position, pull head up, then push down fully to dispense 1 x 10ml (2%) into the trigger bottle.
Attach the trigger and shake bottle gently.
Apply the diluted product by fully wetting the surface. Use a cloth, brush, sponge or mop for even distribution.
Leave the surface wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeast.
Wipe dry or let the surface air dry. Rinsing of the surface is not required.
Directions for Use - Bucket:
Fill bucket with water.
Turn yellow head to bucket position: pull head up, then push down fully. Dose 1x70ml per 3.5L water (2%).
Apply the diluted product by fully wetting the surface. Use a cloth, brush, sponge or mop for even distribution.
Leave the surface wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeast.
Wipe dry or let the surface air dry. Rinsing of the surface is not required.
EN 1276: Tested to EN 1276.
EN 1650: Tested to EN 1650.
EN 13697: Tested to EN 13697.
EN 14476: Tested to EN 14476.
EN 13727: Tested to EN 13727.
EN 13624: Tested to EN 13624.
EN 13967: Tested to EN 13967.